OVR SCCA Forum
June 24, 2017, 01:29:49 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Fender roller  (Read 2370 times)
landstuhltaylor
Member
***
Posts: 75


« on: March 27, 2016, 11:02:17 PM »

Anyone locally have one or know of a shop that does? At the very least I need to roll the rears, might just use a sledge on the front.
Logged
Miniata
Forum Veteran
*
Posts: 557


« Reply #1 on: March 28, 2016, 02:08:11 AM »

Back when I wanted to roll the fenders on my Miata the Eastwood fender rolling tool was something like $250, so I bought a kids Louisville Slugger wood baseball bat for $15, grabbed my heat gun, and went to work. Ended up working very well, didn't crack the paint at all, and had enough of a roll to fit the wider tires when I had it slammed. The Eastwood tool is down to $120 now, and the knockoff is $60 at Amazon. If I were to do it now, I'd just spring for the $60 for the knockoff tool on Amazon.
Logged

Keith Miller
#70 GS
31rx7
Global Moderator
Street Racer
*****
Posts: 3199


Stirring the pot...


WWW
« Reply #2 on: March 28, 2016, 08:32:32 AM »

Back when I wanted to roll the fenders on my Miata the Eastwood fender rolling tool was something like $250, so I bought a kids Louisville Slugger wood baseball bat for $15, grabbed my heat gun, and went to work. Ended up working very well, didn't crack the paint at all, and had enough of a roll to fit the wider tires when I had it slammed. The Eastwood tool is down to $120 now, and the knockoff is $60 at Amazon. If I were to do it now, I'd just spring for the $60 for the knockoff tool on Amazon.

The baseball bat was my method on the Civic.  But, I didn't give a rat's patoot about the paint so I didn't bother with the heat gun. 

There is beauty in those cheap cars.
Logged

Yea, I have a Corvette. But I also have a Fiat, so it evens out.
landstuhltaylor
Member
***
Posts: 75


« Reply #3 on: March 28, 2016, 08:58:41 AM »

Yeah been there done that with VWs, was hoping for something a bit nicer on this car. I'll have to check out Amazon.
Logged
Simi
AX Chief's round table member
Demolition Derby Specialist
*
Posts: 2512


« Reply #4 on: March 28, 2016, 09:19:39 AM »

pretty sure Brian/Neva/Bruno do it at Auto Body Specialists
Logged
WrxRcr
Sr. Member
****
Posts: 111


« Reply #5 on: March 29, 2016, 09:54:49 PM »

I have a roller.  I know from experience though that a lowered s2000 is incapatable.
Logged

09 swp          subaru wrx
12 gunmetal nissan 370z
landstuhltaylor
Member
***
Posts: 75


« Reply #6 on: March 30, 2016, 10:03:28 AM »

Any idea if it will work on a 98-02 Camaro? Bolt pattern is 5x4.75. The car doesn't run right now so I was either hoping to borrow it or once it's back together bring it somewhere.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.048 seconds with 16 queries.